| Glue sensor | A high resolution 12 mm diametre capacitive sensor. |
| Type of cartons | Straight line compact cartons only (200/800 gr/m2). |
| Type of glue | Cold glues (vinyls) deposited by lower glue pot disc or lower glue gun. |
| Sensor positioning | Sensor installed at approx. 0,5 mm from surface of carton and on opposite side
to where glue is deposited (carton's glue flap in between glue and sensor). |
| Error conditions | The error condition is set off whenever a glue defect of at least 10 mm. is detected. By glue defect is meant:
|
| Machine stop | Selectable, by back panel switch, at either 1st error or at attaiment of 3 consecutive
errors. |
| Ejection memory | The equipment is provided with a memory card capable to handle an ejection distance (sensor-ejector) up to 9,99 metres settable
through the front panel shift selector. When this equipment is not connected to a
bar code reader, it will require an Error Drive Interface +
Ejector or
Kicker for the necessary monitoring of wrongly glued cartons to
ejection or marking.
|
